LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 40TE Automatic Transmission) >> DTC Troubleshooting >> P1790-Fault Immediately After Shift >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. FAULT AFTER SHIFT 
    1. This DTC is set along with a Gear Ratio DTC. Perform the appropriate test for the Gear Ratio DTC stored.
      NOTE:

      Check pending DTCs or 1 trip failures if there are no Active or Stored Gear Ratio DTCs.

      .

      Repair 

      • Refer to the DTC INDEX article and perform the appropriate diagnostic procedure.
scientia non olet · About LEMON Manuals