LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (3.6L - DTCS P0645 To P2138) >> Diagnosis And Testing >> P2123-Accelerator Pedal Position Sensor 1 Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

When APP Sensor No. 1 voltage is too high. Engine will additionally idle if the brake pedal is pressed or has failed. Acceleration rate and Engine output are limited. One trip fault and the code will set within five seconds. ETC light is flashing.

scientia non olet · About LEMON Manuals