LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (3.6L - DTCS P0645 To P2138) >> Diagnosis And Testing >> P2122-Accelerator Pedal Position Sensor 1 Circuit Low >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
(K852) 5-VOLT SUPPLY CIRCUIT OPEN
(K852) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
(K23) APP SENSOR NO. 1 SIGNAL CIRCUIT OPEN
(K23) APP SENSOR NO. 1 SIGNAL CIRCUIT SHORTED TO GROUND
(K23) APP SENSOR NO. 1 SIGNAL CIRCUIT SHORTED TO THE (K167) APP SENSOR NO. 1 RETURN CIRCUIT
(K23) APP SENSOR NO. 1 SIGNAL CIRCUIT SHORTED TO THE (K400) APP SENSOR NO. 2 RETURN CIRCUIT
APP SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  STANDARD PROCEDURE  . 

scientia non olet · About LEMON Manuals