LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L - DTCS P0304 To P0615) >> Diagnosis And Testing >> P0344-Camshaft Position Sensor Intermittent - Bank 1 Sensor 1 >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
POSSIBLE CAUSES
CAMSHAFT 1/1 POSITION SENSOR CIRCUIT WIRING OR CONNECTORS
CAMSHAFT 1/2 POSITION SENSOR CIRCUIT WIRING OR CONNECTORS
CAMSHAFT 1/1, TONE WHEEL OR FLEX PLATE
CAMSHAFT 1/2, TONE WHEEL OR FLEX PLATE
CAMSHAFT 1/1 POSITION SENSOR
CAMSHAFT 1/2 POSITION SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  STANDARD PROCEDURE  .