LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 496 ((Passenger Door Module (PDM) - Electrical Diagnostics)) >> DTC Troubleshooting >> B1DA7-Switch Power Supply Circuit Low >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace the Door Module 
    NOTE:

    Anytime this code is logged, the module must be replaced.

    Repair 

    • Replace the Passenger Door Module.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .