LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 ((Driver Door Module (DDM) - Electrical Diagnostics)) >> DTC Troubleshooting >> B1DA7-Switch Power Supply Circuit Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Whenever the internal switch supply circuit falls below 6.8 volts for over 2000 ms., this code will set.

scientia non olet · About LEMON Manuals