LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 ((Driver Door Module (DDM) - Electrical Diagnostics)) >> DTC Troubleshooting >> B1DA7-Switch Power Supply Circuit Low >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace the Driver Door Module in accordance with the Service Information. 
    NOTE:

    Anytime this code is logged, the module must be replaced.

    Repair 

    • Replace the Driver Door Module in accordance with the Service Information.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals