LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Power Top/Sunroof (Service Information)) >> Switch, Sunroof >> Installation >> Installation

Switch, Sunroof: Installation: Installation

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the sunroof control switch into the overhead console assembly. Push the switch until it is securely held in place by the mounting tabs.
  2. Install the overhead console.
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals