Sensor, Manifold Air Pressure (Map): Removal: 2.4L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAP Sensor Connector

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Disconnect the electrical connector from the manifold absolute pressure (MAP) sensor.
Remove the screw from the MAP sensor.

Fig 2: MAP Sensor
Courtesy of CHRYSLER GROUP, LLC
Remove the MAP sensor.