Sensor, Manifold Air Pressure (Map): Installation: 2.4L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAP Sensor

Courtesy of CHRYSLER GROUP, LLC

Install the manifold absolute pressure (MAP) sensor to intake manifold.

Fig 2: MAP Sensor Connector
Courtesy of CHRYSLER GROUP, LLC
Tighten screw to 4.5 N.m (40 in. lbs.).
Connect the electrical connector to the sensor.
Install the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).