LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 474 (Ignition System (Service Information)) >> Capacitor, Ignition >> Installation >> 3.6L

Capacitor, Ignition: Installation: 3.6L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electrical Connector, Mounting Bolt & Ignition Capacitor
GC0144203Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition coil capacitor (2) and bolt (3). Tighten the bolt to 10 N.m (89 in. lbs.).
  2. Connect the electrical connector (1).
  3. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals