LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Restraints System (Service Information)) >> Buckle, Seat Belt >> Removal >> Rear

Buckle, Seat Belt: Removal: Rear

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Rear Seat Belt Buckle
GC0122053Courtesy of CHRYSLER GROUP, LLC
  1. Remove the rear seat cushion. Refer to COVER, SEAT CUSHION, REMOVAL , COVER, SEAT CUSHION, FRONT, REMOVAL or COVER, SEAT CUSHION, REMOVAL .
  2. Remove the nut (2) to the seat belt buckle (1 or 4).
  3. Lift buckle (1 or 4) off stud and remove from vehicle.
scientia non olet · About LEMON Manuals