LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 456 (Antilock Brake System (Abs) - Electrical Diagnostics) >> DTC Troubleshooting >> C121A-Steering Angle Sensor Not Initialized >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

This DTC may set with DTC C1231-DRIVE TEST: STEERING ANGLE SENSOR due to cycling of ignition several times or entering and exiting diagnostics several times.

Perform the diagnostic procedure for C1231-DRIVE TEST: STEERING ANGLE SENSOR  as if the DTC is Active.