LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 454 (Rear Suspension) >> Link, Stabilizer Bar >> Removal >> Removal

Link, Stabilizer Bar: Removal: Removal

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Stabilizer Link
GC0122184Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. While holding the stabilizer bar link lower stud stationary, remove the nut (3) securing the link (2) to the lower control arm (4).
  3. While holding the stabilizer bar link upper stud stationary, remove the nut (5) securing the link (2) to the stabilizer bar (1).
  4. Remove the stabilizer bar link (2).
scientia non olet · About LEMON Manuals