3.6L Coolant Crossover

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Thermostat Housing & Thermostat

Courtesy of CHRYSLER GROUP, LLC

Remove the thermostat housing assembly. Refer to THERMOSTAT, REMOVAL .

Fig 2: Coolant Outlet Housing, Water Pump & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the Heater supply hose from the coolant crossover (1).
Remove the coolant crossover mounting bolts. Take notice to the four bolts (2) that bolt directly to the timing cover.
Remove the coolant crossover and discard Gaskets.