LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 453 (Engine Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 3.6L

TENSIONER, Belt: Installation: 3.6L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Measurement A
GC0144244Courtesy of CHRYSLER GROUP, LLC
  1. An indexing slot is located on back of tensioner. Align this slot to the head of the bolt on the front cover. Install the mounting bolt. Tighten bolt to 41 N.m (30 ft. lbs.).
  2. Install main drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
  3. Check belt indexing marks.
  4. Install the air intake system. Refer to BODY, AIR CLEANER, INSTALLATION for 2.4L or BODY, AIR CLEANER, INSTALLATION for 3.6L.
  5. Connect the negative battery.
scientia non olet · About LEMON Manuals