DECKLID Weatherstrip

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Decklid Weatherstrip Fasteners

Courtesy of CHRYSLER GROUP, LLC

Place convertible top in vertical position and decklid into service position. Refer to DECKLID/HATCH/LIFTGATE/TAILGATE .
Remove four fasteners (1), two on each side.

Fig 2: Locating Fasteners & Push Pins
Courtesy of CHRYSLER GROUP, LLC
Remove push pins (2), one on each side.
Carefully pull off weatherstrip.
Clean residue left behind from the weatherstrip.