LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (Body - Interior & Exterior) >> Convertible Top, Retractable Hard Top Unique Components >> Headliner >> Removal >> Front Panel

Front Panel

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Right And Left Center Rail Trim & Push Pins
GC0122897Courtesy of CHRYSLER GROUP, LLC
  1. Open top to vertical position. Refer to DECKLID/HATCH/LIFTGATE/TAILGATE .
  2. Using a trim stick or equivalent, gently remove both push pins (2) in the bottom of the right and left center rail trim (1).
  3. Gently pry off both left and right center rail trim.
    Fig 2: Rail Trim Push Pins
    GC0122898Courtesy of CHRYSLER GROUP, LLC
  4. Using a door trim panel tool or equivalent, gently pry off the front push pin fasteners and then the rear fasteners and remove front panel headliner.
  5. Remove any push pins that remain in the front panel.
  6. Remove the headliner from the vehicle.
scientia non olet · About LEMON Manuals