LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (Body - Interior & Exterior) >> Convertible Top, Retractable Hard Top Unique Components >> Bracket, Rear >> Removal >> Removal

Bracket, Rear: Removal: Removal

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Bracket & Fasteners
GC0122892Courtesy of CHRYSLER GROUP, LLC
  1. Remove the front trunk carpeted panel.
  2. Remove the mounting fasteners (3) from the rear bracket (1).
  3. Using a grease pencil or equivalent, mark the position of the rear bracket to aid in installation.
  4. Remove the rear bracket from the vehicle.
scientia non olet · About LEMON Manuals