LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 450 (Lamps/Lighting - Exterior (Service Information)) >> Diagnosis And Testing >> Diagnosis And Testing - Exterior Lighting >> Backup Lamps

Backup Lamps

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
CONDITION POSSIBLE CAUSES CORRECTION
BACKUP LAMP DOES NOT ILLUMINATE 1. Ineffective or missing bulb. 1. Test and replace backup lamp bulb if required.
2. Ineffective ground circuit. 2. Test and repair open backup lamp ground circuit if required.
3. Ineffective feed circuit. 3. Test and repair open backup lamp feed circuit if required.
4. Ineffective switch. 4. Test and replace backup lamp switch (manual transmission) or TRS (automatic transmission) if required.
5. Ineffective TIPM inputs or outputs. 5. Use a diagnostic scan tool to test the TIPM inputs and outputs. Refer to the appropriate Electrical Diagnostics information.
BACKUP LAMP DOES NOT EXTINGUISH 1. Ineffective feed circuit. 1. Test and repair shorted backup lamp feed circuit if required.
2. Ineffective switch. 2. Test and replace backup lamp switch (manual transmission) or transmission range sensor (automatic transmission) if required.
3. Ineffective TIPM inputs or outputs. 3. Use a diagnostic scan tool to test the TIPM inputs and outputs. Refer to the appropriate Electrical Diagnostics information.
scientia non olet · About LEMON Manuals