Module, Steering Column Control: Installation: Installation: Assembly

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Right Stalk Electrical Connector

Courtesy of CHRYSLER GROUP, LLC

Connect the right stalk electrical connector.

Fig 2: Right Multi-Function Switch Retaining Screw
Courtesy of CHRYSLER GROUP, LLC
Slide the right stalk into the groove and install the one retaining screw.

Fig 3: Left Stalk Electrical Connector
Courtesy of CHRYSLER GROUP, LLC
Connect the left stalk switch electrical connector.

Fig 4: Left Multi-Function Switch Stalk Retaining Screw
Courtesy of CHRYSLER GROUP, LLC
Install the left stalk switch retaining screw.