LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (3.6L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Front >> Removal >> Removal

Insulator, Engine Mount, Front: Removal: Removal

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Aft Crossmember, Crossunder Pipe & Catalytic Converters
GC0147025Courtesy of CHRYSLER GROUP, LLC
  1. Remove the front fore and aft crossmember. Refer to CROSSMEMBER, FRONT FORE AND AFT, REMOVAL .
    Fig 2: Front Engine Mount Bracket & Bolts
    GC0147038Courtesy of CHRYSLER GROUP, LLC
  2. If required, remove the three bolts (2) and the front engine mount bracket (1).
scientia non olet · About LEMON Manuals