LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (2.4L Engine (Service Information)) >> Engine Block >> Crankshaft >> Standard Procedure >> Standard Procedure - Measuring Crankshaft End Play

Standard Procedure - Measuring Crankshaft End Play

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Crankshaft End Play Using Dial Indicator
GC0121445Courtesy of CHRYSLER GROUP, LLC
1 - Crankshaft
2 - DIAL INDICATOR
  1. Mount a dial indicator (2) to front of engine with the locating probe on nose of crankshaft (1).
  2. Move crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move crankshaft all the way to the front and read the dial indicator. For end play specification, refer to SPECIFICATIONS .
scientia non olet · About LEMON Manuals