LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (2.4L Engine (Service Information)) >> Cylinder Head >> Cleaning >> Cleaning

Cylinder Head: Cleaning: Cleaning

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

To ensure engine gasket sealing, proper surface preparation must be performed, especially with the use of aluminum engine components and multi-layer steel cylinder head gaskets.

NOTE:

Multi-Layer Steel (MLS) head gaskets require a scratch free sealing surface.

Remove all gasket material from cylinder head and block. Refer to ENGINE GASKET SURFACE PREPARATION . Be careful not to gouge or scratch the aluminum head sealing surface.

Clean all engine oil passages.

scientia non olet · About LEMON Manuals