Section 443 (Base Brakes (Service Information)): Specifications: Specifications
WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| ABS ICU Mounting Bolt (To Bracket) | 11 | - | 97 |
| ABS ICU Mounting Pins | 11 | - | 97 |
| ABS ICU Mounting Bracket Screws (To Frame) | 23 | 17 | 203 |
| ABS ICU Mounting Bracket Screw And Nut (To Frame) - Right-Hand-Drive | 23 | 17 | 203 |
| ABS ABM Mounting Screws (To HCU) | 2 | - | 17 |
| ABS Dynamics Sensor Mounting Nuts | 9 | 6.5 | 80 |
| ABS Wheel Speed Sensor Head Mounting Screw - Front | 12 | 9 | 106 |
| ABS Wheel Speed Sensor Head Mounting Screw - Rear | 12 | 9 | 106 |
| ABS Wheel Speed Sensor Routing Bracket Mounting Screw | 18 | 13 | 160 |
| Brake Flex Hose Banjo Bolt - Front Caliper | 35 | 26 | 310 |
| Brake Flex Hose Fitting- Rear Caliper | 15 | 11 | 133 |
| Brake Pedal/Booster Mounting Nuts | 23 | 17 | 200 |
| Brake Tube Nuts | 20 | 15 | 177 |
| Disc Brake Caliper Adapter Bracket (To Knuckle) - Front | 108 | 80 | - |
| Disc Brake Caliper Adapter Bracket (To Support) - Rear | 60 | 44 | - |
| Disc Brake Caliper Guide Pin Bolts - Front | 43 | 32 | - |
| Disc Brake Caliper Guide Pin Bolts - Rear | 43 | 32 | - |
| Disc Brake Caliper Bleeder Screw | 8 | 6 | 71 |
| Fluid Reservoir Mounting Screw | 5.5 | 4 | 48 |
| Master Cylinder Mounting Nuts | 25 | 18 | 216 |
| Parking Brake Lever Mounting Nuts | 25 | 18 | 216 |
| Wheel Mounting (Lug) Nuts | 135 | 100 | - |