LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 430 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 66RFE Automatic Transmission - 2500 Hd & 3500) >> Diagnosis And Testing >> P0884-Power Up At Speed >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

This DTC will set if the PCM powers up and senses the vehicle in a valid forward gear with no PRNDL DTCs and an output speed above 800 rpm, approximately 32 Km/h or 20 mph.

scientia non olet · About LEMON Manuals