LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 427 (5.7L - DTCS P1496 To P2314 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P1DBD-Fuel Pressure Sensor Rationality >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

At idle, the rate of change in fueling with respect to the rate of change of pressure is below the calibrated fail high threshold or above the calibrated fail low threshold while the monitor was running.

scientia non olet · About LEMON Manuals