LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 426 (5.7L - DTCS P058C To P1495 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P064A-Fuel Pump Control Module >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

MIL sets if excessive current is detected on the Pulse Width Modulated (PWM) signal sent by the Fuel Pump Control Module (FPCM) to the Fuel Pump assembly.

scientia non olet · About LEMON Manuals