LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 416 (5.7L CNG - DTCS P000B To P0203 - 2500 Hd) >> Diagnosis And Testing >> P0161-O2 Sensor 2/2 Heater Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 2500 HD and 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

No sensor output is received when the PCM powers up the O2 Sensor Heater. Two trip fault. Three good trips to turn off the MIL.