Diagnostic Test
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FOR OTHER ACTIVE DTCS NOTE:
When this DTC is set, the module must be replaced. Diagnose and repair all DTCs prior to module replacement.
- With the scan tool, read DTCs.
Are any other active DTCs present?
Yes
- Perform the appropriate diagnostic procedure for each DTC. Repair all DTCs. Replace the BCM in accordance with the Service Information. Refer to MODULE, BODY CONTROL, REMOVAL .
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Replace the BCM in accordance with the Service Information. Refer to MODULE, BODY CONTROL, REMOVAL .
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
- With the scan tool, read DTCs.