LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 403 (Occupant Restraint Controller (Orc) - DTCS B0001-11 To B0099-96 - 2500HD & 3500HD) >> Diagnosis And Testing >> B0050-2B-Driver SEATBELT Sensor - Wires Shorted Together >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

This DTC sets when the ORC detects the (R57) Driver Seat Belt Switch Sense circuit is shorted to ground or the seat belt switch and seat belt ground circuits become shorted together for more than 2.5 seconds. This DTC transitions from active to stored when the module sees a recovery from the shorted together condition for greater than five seconds.

scientia non olet · About LEMON Manuals