Torque Converter: Description: Description: Stator

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Stator Location

Courtesy of CHRYSLER GROUP, LLC

1 - STATOR

2 - IMPELLER

3 - FLUID FLOW

4 - TURBINE

The stator assembly is mounted on a stationary shaft which is an integral part of the oil pump. The stator (1) is located between the impeller (2) and the turbine (4) within the torque converter case.

Fig 2: Identifying Stator Components

Courtesy of CHRYSLER GROUP, LLC

1 - CAM (OUTER RACE)

2 - ROLLER

3 - SPRING

4 - INNER RACE

The stator contains an overrunning clutch (1-4), which allows the stator to rotate only in a clockwise direction. When the stator is locked against the overrunning clutch, the torque multiplication feature of the torque converter is operational.