LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 397 (68RFE Automatic Transmission (Service Information) 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> Converter Housing Fluid Leak >> Torque Converter Leak Points

Torque Converter Leak Points

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cutaway View Of Torque Converter
GC0109077Courtesy of CHRYSLER GROUP, LLC
1 - TURBINE ASSEMBLY
5 - IMPELLER ASSEMBLY
2 - STATOR
6 - CONVERTER CLUTCH PISTON
3 - CONVERTER HUB
7 - TURBINE HUB
4 - O-RING
 

Possible sources of converter leaks are:

  1. Leaks at the weld joint around the outside diameter weld.
  2. Leaks at the converter hub weld.

In most cases, a torque converter which is wet from transmission fluid indicates a leak at one of these areas.