LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 392 (Passive Entry Module (PEM) (Service Information) 2500 Hd & 3500 Hd) >> Antenna, Passive Entry >> Removal >> Center Floor Console

Center Floor Console

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Antenna
GC0154620Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the center floor console from the vehicle.
  3. Disconnect the wire harness connector from the connector receptacle (2) for the Low Frequency (LF) antenna (1).
  4. Remove the two screws (3) that secure the antenna in place.
  5. Remove the antenna from the console.
scientia non olet · About LEMON Manuals