Switch, Lock: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Location Of Window/Lock Switch (Driver Side)

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Using a trim stick, gently pry the switch from the door trim panel.
Disconnect electrical connectors.
Remove switch from trim panel.

Fig 2: Location Of Window Switch (Rear)

Courtesy of CHRYSLER GROUP, LLC