LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 386 (Vehicle Theft Security (Service Information) - 2500 Hd & 3500 Hd) >> Switch, Hood Ajar >> Removal >> Stand Alone Switch Striker

Stand Alone Switch Striker

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Switch Components
GC0086782Courtesy of CHRYSLER GROUP, LLC
  1. Unlatch and open the hood.
  2. Release the three lock tabs (2) on the stand alone hood ajar switch striker (3) and pull the striker away from the inner hood panel reinforcement (1).
  3. Remove the striker from the vehicle.
scientia non olet · About LEMON Manuals