LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 386 (Vehicle Theft Security (Service Information) - 2500 Hd & 3500 Hd) >> Switch, Hood Ajar >> Removal >> Stand Alone Switch Bracket

Stand Alone Switch Bracket

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Ajar Switch & Mounting Bracket
GC0086783Courtesy of CHRYSLER GROUP, LLC
  1. Remove the stand alone hood ajar switch (4) from the mounting bracket (3). Refer to SWITCH, HOOD AJAR, REMOVAL .
  2. Remove the screw (2) that secures the mounting bracket (3) to the upper radiator cross member (1).
  3. Remove the mounting bracket from the upper radiator cross member.
scientia non olet · About LEMON Manuals