LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 359 (Battery System (Service Information) 2500 Hd & 3500 Hd) >> Tray, Battery >> Removal >> Diesel-Right Side

Diesel-Right Side

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery from the battery tray. Refer to BATTERY, REMOVAL .
  2. Disconnect the wire harness retainers and remove relays from the battery tray.
    Fig 1: Air Heater & Components
    GC0155336Courtesy of CHRYSLER GROUP, LLC
  3. Remove two nuts (2), and the air heater jumper wire (1, 3).
  4. Remove the two fuel heater relay wires (4).
  5. Detach the wire harness retainer (5) from solenoid body.
    Fig 2: Lower Battery Tray Bolts
    GC0155305Courtesy of CHRYSLER GROUP, LLC
  6. Remove the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
  7. Remove the two lower bolts (1) securing battery tray.
    Fig 3: Battery Tray & Bolts
    GC0155316Courtesy of CHRYSLER GROUP, LLC
  8. Remove bolts (1, 2) the battery tray (3) from the vehicle.