LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 359 (Battery System (Service Information) 2500 Hd & 3500 Hd) >> Cables, Battery >> Removal >> Right-Side >> Right Side Negative

Right Side Negative

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Negative Cable & Components
GC0155160Courtesy of CHRYSLER GROUP, LLC
  1. Remove nut (2) and the negative battery cable (1) from terminal clamp (4).
  2. Loosen nut (3) and disconnect and isolate the battery negative cable terminal clamp (4).
  3. Remove the bolt (4) securing the negative cable to the left front fender.
    Fig 2: Battery Negative Cable & Bolt
    GC0155170Courtesy of CHRYSLER GROUP, LLC
  4. Remove bolt (2) and the battery negative cable (1) from the vehicle.
scientia non olet · About LEMON Manuals