LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 ((Antilock Brake System (Abs) - Electrical Diagnostics - 2500 Hd & 3500 Hd)) >> Diagnosis And Testing >> C1082-2F-Vacuum Pressure Sensor - Signal Erratic >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The erratic vacuum pressure sensor fault is set when the ABS module detects multiple quick voltage transitions to faulted levels.

NOTE:

If any other DTCs are present, repair them first before continuing with this diagnostic procedure.

scientia non olet · About LEMON Manuals