Diagnostic Test
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- INITIALIZE ANTI-LOCK BRAKES SYSTEM (ABS) MODULE
- Initialize the ABS Module, Perform the ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .
Is the DTC status still Active?
Yes
- Replace the Anti-Lock Brake System (ABS) Module in accordance with the Service Information. Refer to MODULE, ANTI-LOCK BRAKE SYSTEM, REMOVAL .
- Perform the ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
NOTE:This DTC may have been caused due to road conditions at start of drive.
- Test complete, the condition or conditions that originally set this DTC are not present at this time.
- Initialize the ABS Module, Perform the ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .