LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 351 (6.7L Engine (Service Information) - 2500 Hd & 3500 Hd) >> Engine Block >> Damper, Vibration >> Removal >> Removal >> High Output Engine

High Output Engine

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Damper (High Output Engine)
GC0143939Courtesy of CHRYSLER GROUP, LLC
  1. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
    NOTE:

    Ensure that the friction shim stays with the damper when it is removed. It will need to be reinstalled with the damper.

  2. Remove the four bolts (1), vibration damper (4), and friction shim (5).
scientia non olet · About LEMON Manuals