Solenoid, Variable Valve Timing (VVTS), Exhaust: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 2500 HD and 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Control Valve

Courtesy of CHRYSLER GROUP, LLC

Remove intake manifold. Refer to MANIFOLD, INTAKE, CNG , REMOVAL, 5.7L .
Disconnect VVTS electrical connector (2).
Remove VVTS fastener (1).

Fig 2: Removing/Installing OCV
Courtesy of CHRYSLER GROUP, LLC

NOTE:
To remove the VVTS, the engine must be at room temperature.
Rotate and pull the VVTS out.