Linkage, Link And Coil: Specifications: Torque
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
2500/3500
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Pitman Arm Gear Shaft Nut (2500, 3500) | 240 | 177 | - |
| Drag Link to Pitman Arm (2500, 3500) | 135 | 100 | - |
| Drag Link to Tie Rod (2500, 3500) | 136 | 100 | - |
| Drag Link Adjuster Clamp (2500, 3500) | 54 | 40 | - |
| Tie Rod End to Knuckle (2500, 3500) | 97 | 71 | - |
| Tie Rod End Adjuster Clamp (2500, 3500) | 54 | 40 | - |
| Stabilizer Bar Link to Axle (2500, 3500) | 68 | 50 | - |
| Steering Damper to Axle or Linkage(2500, 3500) | 101 | 75 | - |
| Steering Damper Bracket U-Bolt Nuts (2500, 3500) | 61 | 45 | - |
| Track bar to Axle - M16 fastener (2500, 3500) | 271 | 200 | - |
| Track Bar to Frame - M16 fastener (2500, 3500) | 271 | 200 | - |
4500/5500
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Pitman Arm Gear Shaft Nut (4500, 5500) | 300 | 221 | - |
| Drag Link Pitman Arm (4500, 5500) | 156 | 115 | - |
| Drag Link/Tie Rod to Knuckle, RH (4500, 5500) | 140 | 100 | - |
| Drag Link Adjuster Clamp (4500, 5500) | 55 | 40 | - |
| Tie Rod End to Knuckle LH (4500, 5500) | 100 | 74 | - |
| Tie Rod End Adjuster Clamp (4500, 5500) | 90 | 66 | - |
| Stabilizer Bar Link to Axle (4500, 5500) | 149 | 110 | - |
| Stabilizer Bar Link to Stabilizer bar (4500, 5500) | 60 | 44 | - |
| Stabilizer Bar to Frame (4500, 5500) | 58 | 43 | - |
| Steering Damper to Axle (4500, 5500) | 117 | 86 | - |
| Steering Damper to Linkage (4500, 5500) | 117 | 86 | - |
| Steering Damper Bracket to Linkage U-Bolt Nuts (4500, 5500) | 55 | 41 | - |
| Steering Damper Bracket to Linkage Bolt (4500, 5500) | 135 | 100 | - |
| Track bar to Axle (4500, 5500) | 370 | 273 | - |
| Track Bar to Frame (4500, 5500) | 370 | 273 | - |