LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Steering System - 2500 Hd & 3500 Hd) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Removal >> Damper - 2500/3500

Damper - 2500/3500

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Link And Coil Steering System Components
GC0143914Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the steering damper mounting nut and bolt (9) at the axle.
    Fig 2: Identifying Steering Damper & Linkage Bracket Bolt
    GC0137167Courtesy of CHRYSLER GROUP, LLC
  3. Remove the steering damper mounting nut (6) at the linkage bracket (3).
  4. Remove the steering damper (1).
scientia non olet · About LEMON Manuals