LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Steering System - 2500 Hd & 3500 Hd) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Installation >> Damper - 4500/5500

Damper - 4500/5500

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Steering Damper, Linkage Bracket, Nuts & Bolts
GC0152015Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering damper (3) on the axle bracket, install the bolt and nut (4) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  2. Position the steering damper (3) on the linkage bracket (5), install the bolt and nut (2) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  3. Remove the supports and lower the vehicle.
scientia non olet · About LEMON Manuals