LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Steering System - 2500 Hd & 3500 Hd) >> Column >> Coupling, Steering Column, Lower >> Installation >> Installation

Coupling, Steering Column, Lower: Installation: Installation

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lower Steering Coupler
GC0092285Courtesy of CHRYSLER GROUP, LLC
  1. Install the coupling (2) to the steering rack and pinion, and intermediate shaft using the marks made in the removal process.
    NOTE:

    New pinch bolts must be used for reinstallation.

  2. Install the lower coupling lower pinch bolt (1) and tighten to 57 N.m (42 ft. lbs.).
    Fig 2: Lower Coupling & Pinch Bolt
    GC0088319Courtesy of CHRYSLER GROUP, LLC
  3. Install the lower coupling upper pinch bolt (1) and tighten to 38 N.m (28 ft. lbs.).
  4. Install the left front tire and wheel assembly. Refer to SPECIFICATIONS .
  5. Remove the support and lower the vehicle.
  6. Reconnect the negative battery cable.
  7. Unlock the steering wheel.
scientia non olet · About LEMON Manuals