Stabilizer Bar

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

All view are typical.

Fig 1: Identifying Retainer, Grommet, Stabilizer Bar, Axle Bracket & Stabilizer Link

Courtesy of CHRYSLER GROUP, LLC

1 - RETAINER

2 - GROMMET

3 - STABILIZER BAR

4 - AXLE BRACKET

5 - STABILIZER LINK

Raise and support the vehicle.
Hold the stabilizer link (5) shafts with a wrench and remove the link nuts at the stabilizer bar (3).
Remove the retainers (1) and grommets (2) from the stabilizer bar links (5).
Remove the stabilizer bar clamps from the frame rails and remove the stabilizer bar.