LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Front Suspension & Wheel Alignment - 2500 Hd & 3500 Hd) >> Front, Link And Coil >> Ball Joint, Suspension, Lower >> Removal >> 4500 And 5500

4500 And 5500

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the axle shaft from the axle.
  2. Remove the steering knuckle. Refer to KNUCKLE, STEERING, REMOVAL .
    Fig 1: Identifying Lower Ball Joint, Receiver, Driver, And Press
    GC0107529Courtesy of CHRYSLER GROUP, LLC
  3. Position special tool (special tool #9859-4, Cup, Receiver) (RECEIVER) (4) and (special tool #9859-3, Disc, Ball Joint Remover) (DRIVER) (2) with tool (special tool #C-4212F, Press, Ball Joint) (PRESS) (1) shown in illustration to remove lower ball stud.
scientia non olet · About LEMON Manuals