LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 334 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 65RFE Automatic Transmission - 1500)) >> Diagnosis And Testing >> P0944-Loss Of Hydraulic Pump Prime >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

If the transmission begins to slip in a forward gear and all the pressure switch(s) that should be closed are open a loss of prime test begins. Available elements are turned on by the Powertrain Control Module (PCM) to see if pump prime exists. The DTC sets if no pressure switch(s) respond.

scientia non olet · About LEMON Manuals